Esxi And Vsphere Vswitch Config With Gns3

[AD-TEAM]

Esxi And Vsphere Vswitch Config With Gns3
Published 10/2024
MP4 | Video: h264, 1920x1080 | Audio: AAC, 44.1 KHz
Language: English | Size: 1.24 GB | Duration: 2h 38m

vSphere Distributed Switch Home Lab

[b]What you'll learn[/b]

vSphere Distributed Switch Configuration

Trunking with Cisco L2 Switch on GNS3

MS Loopback Adapter Config and Mapping to VMNICs

Virtualization with ESXi 7 and vSphere 7 vCenter Config

[b]Requirements[/b]

Networking,Virtualization Knowledge is must

[b]Description[/b]

A distributed virtual switch is like a template stored in vCenter. When you create a distributed virtual switch in vCenter, identical hidden standard vSwitches are created on all ESXi hosts added to VDS configuration. If you create a port group for VLAN on a distributed virtual switch, the same port group will be created on all vSwitches of ESXi hosts associated to that VDS. You only need to create a port group once, which is a significant advantage. A distributed virtual switch created in vCenter is a control plane (used for management) and hidden standard vSwitches on ESXi hosts are the IO plane (responsible for network operation).vCenter is a management system for vSphere environment, including a distributed virtual switch. If, for some reason, vCenter Server is unavailable, you will not be able to change VMware distributed switch configuration, including reconnecting virtual machines to other port groups. However, even if vCenter is offline, a network will remain in a working state because hidden standard vSwitches (the IO plane) are responsible for network operation. Keep in mind that vCenter cannot be connected to a distributed virtual switch.vCenter Distributed Switch VLANs - DportGroups will Connect to the Cisco L2 Switch Trunk through the already configured MS Loopback Adapters/VMNICs and attached to the ESXi Hosts. We Dont need to assign IP Addresses for the MS LoopBac Adapters in Windows11. Since While Configuring the DPortGroups We will be specifying the VLANs to get mapped and the VMs which are going to sit in those VLANs will have their Subnet Range, Which will match with the Cisco L2 Switch VLANs and SVIs(Switch Virtual Interfaces) Configured.

Overview

Section 1: Introduction

Lecture 1 Introduction

Section 2: ESXi-7 Host Installation

Lecture 2 ESXi-7 Host Installation

Section 3: vCenter vSphere Installation

Lecture 3 vCenter vSphere Installation

Section 4: GNS3 with Cloud Adapters and ESXi Integration

Lecture 4 GNS3 with Cloud Adapters and ESXi Integration

Section 5: Introduction to vSwitch

Lecture 5 Introduction to vSwitch

Section 6: Creating Standard vSwitch VSS

Lecture 6 Creating Standard vSwitch VSS

Section 7: Creating Distributed Switch (dvSwitch) in vSphere

Lecture 7 Creating Distributed Switch (dvSwitch) in vSphere

Section 8: dvSwitch (Distributed Switch) Config in vSphere with GNS3

Lecture 8 dvSwitch (Distributed Switch) Config in vSphere with GNS3

Section 9: Thanks.!

Lecture 9 Thanks.!

Experienced Engineers with Virtualization

FileAxa

[To see links please register or login]

RapidGator

[To see links please register or login]

FileStore
TurboBit

[To see links please register or login]