KISSsoft 2025 SP1 25.0.0.1 Multi x64

[Farid]

Year/Release Date : 2025
Version : 25.0.0.1
Bit depth : 64bit
Interface language : Multilingual (Ru is present)
Tablet : present
Advertising : none
System requirements
Minimum system requirements
The following computer configuration is required for the programs to work:
▪ Operating system: Windows 64-bit, Windows 11 and above
▪ Windows N and KN require installation of Microsoft Media Feature Pack
▪ Windows servers require Microsoft Media Foundation to be installed
▪ Processor: supports at least SSE2
▪ RAM: 6 GB RAM and above
▪ Screen resolution: not less than 1280 x 1024 pixels
▪ OpenGL 3.2
▪ Printer: Windows
▪ Hard disk: from 800 MB to 3 GB (depending on configuration)
Network licenses/floating licenses:
▪ Server requirements for installation on a server: Windows Server 2019 and above.
▪ To manage a floating license, a permissions directory located on the server is required.
▪ Each KISSsoft user must have the following access rights in the directory: read, write and
removal.
▪ The hardware code of the access rights directory must remain unchanged and differ from 0 (this can be
check in the license management tool in KISSsoft).
▪ For a virtual server, it is necessary to explicitly define the serial number of the hard disk directory
access rights. Proper operation using a virtual server cannot be
guaranteed, in this case it is necessary to conduct tests.
▪ When using a server farm, multiple serial numbers may be encountered
hard drives, they can be recorded in the license file (no more than 10).
Licenses with hardware key:
▪ At least one free USB 2.0 port is required
Additional requirements may apply for certain features. In this case, it is recommended
Please consult your local partner or contact KISSsoft AG.

Description
software package The KISSsoft is designed for designing, analyzing and optimizing machine parts (gear transmissions, shafts, bearings, connecting elements, belt and chain transmissions), modeling gearboxes, transmissions, gearboxes, and drive assemblies. The software package includes three modules: KISSsoft, KISSsys and GPK.
software package The developer of the KISSsoft is the Swiss company KISSsoft AG, which develops software for engineers and designers in a wide variety of fields: whether it is designing funiculars, gearboxes for equipment, transmissions for Formula 1 cars or small-sized gears for Mars rovers.
Design, optimization and calculation of machine parts with KISSsoft
KISSsys is a special application that allows, by managing calculations, to simulate a complete system of machine elements, thereby significantly increasing the efficiency and safety of calculations of gearboxes and transmissions.
GPK - a package for calculating and optimizing gearboxes and reducers.
Cost analysis of gearbox manufacturing (manufacturing costs are calculated simultaneously with general calculations at the initial design stage)
Testing of the entire transmission or transmission system under various loads in a matter of moments.
Receiving complete and accurate information: Size, weight, cost, delivery time?
GPK will allow you to calculate the product as a whole, simultaneously assessing the weight, dimensions and other characteristics.

Installation and treatment
We start the installation by running KISSsoft-2025.exe as an administrator
(this is what is written in the instructions, but they were in Chinese, I translated them and made my instructions more understandable).
We select the language we need from the list

If some libraries are not installed, it will offer to install, agree

After installing the libraries, click next

We accept the terms of the agreement

Next, select the installation location (I did not install it on the system disk) and click Next

We receive

We select as on the screen where the checkboxes are, nothing else is needed and click next
We receive

Click install
Next we say that we don't have a license file as on the screen and click next

We receive

We don't check for updates, skip this step
Before launching the program, launch the keygen from the KISSsoft 2025 SP0 Multi x64 folder and the license file will appear in the same place where the keygen is launched -
copy it to the program folder, I had f:\Installed programs for testing\KISSsoft 2025\license\ you will have your own.
Next, we launch the program and answer no to the question about updating, as in the screenshot

Go to the license management tool as shown on the screenshot

In the general, select our license file as in the screenshot and save.

Close the program.
We launch the update from the KISSsoft 2025 SP1 Multi x64 Update Only folder also from the admin and get

We accept and select the installation location as before

It unpacks quickly and simply disappears, the program itself does not start.
Run the keygen from the KISSsoft 2025 SP1 Multi x64 Update Only folder, get the license file and copy it to
f:\Installed programs for testing\KISSsoft 2025\license\(you will have your own folder).
Then you can run the program and work.
Run it, check in the license management, there should be a license file there - if suddenly there is not, select it.
P.S. I don't know about updating - it asks me every time I launch it, but I wouldn't risk it - you can get caught and lose both the hardware code (the developer will simply ban it) and the license, of course. So I wouldn't risk it.
I described the installation in detail, you can't go wrong here

[center]⋆🕷- - - - -☽───⛧ ⤝❖⤞ ⛧───☾ - - - -🕷⋆[/center]

⭐️ KISSsoft 2025 SP1 25.0.0.1 Multi x64 ✅ (830.65 MB)

RapidGator Link(s)

[To see links please register or login]

NitroFlare Link(s)

[To see links please register or login]