php7'] = "PHP returned: Failed to write the file to disk. Please contact your forum administrator with this error.";
$l['error_uploadfailed_phpx'] = "PHP returned error code: {1}. Please contact your forum administrator with this error.";
$l['error_uploadfailed_nothingtomove'] = "An invalid file was specified, so the uploaded file could not be moved to its destination.";
$l['error_uploadfailed_movefailed'] = "There was a problem moving the uploaded file to its destination.";
$l['error_uploadfailed_lost'] = "The attachment could not be found on the server.";
$l['error_emailmismatch'] = "The email addresses you entered do not match. Please go back and try again";
$l['error_nopassword'] = "You did not enter a valid password.";
$l['error_usernametaken'] = "The username you have chosen is already registered. If you have previously registered on these forums, please login.";
$l['error_nousername'] = "You did not enter a username.";
$l['error_invalidusername'] = "The username you have entered appears to be invalid.";
$l['error_invalidpassword'] = "The password you entered is incorrect. If you have forgotten your password, click here. Otherwise, go back and try again.";
$l['error_postflooding'] = "We are sorry but we cannot process your post. The administrator has specified you are only allowed to post once every {1} seconds.";
$l['error_nopermission_guest_1'] = "You are either not logged in or do not have permission to view this page. This could be because one of the following reasons:";
$l['error_nopermission_guest_2'] = "You are not logged in or registered. Please login and retry the desired action.";
$l['error_nopermission_guest_3'] = "You do not have permission to access this page. Are you trying to access administrative pages or a resource that you shouldn't be? Check in the forum rules that you are allowed to perform this action.";
$l['error_nopermission_guest_4'] = "Your account may have been disabled by an administrator, or it may be awaiting account activation.";
$l['error_nopermission_guest_5'] = "You have accessed this page directly rather than using appropriate forms or links.";
$l['login'] = "Login";
$l['need_reg'] = "Need to register?";
$l['forgot_password'] = "Forgotten your password?";
$l['error_nopermission_user_1'] = "You do not have permission to access this page. This could be because of one of the following reasons:";
$l['error_nopermission_user_ajax'] = "You do not have permission to access this page.";
$l['error_nopermission_user_2'] = "Your account has either been suspended or you have been banned from accessing this resource.";
$l['error_nopermission_user_3'] = "You do not have permission to access this page. Are you trying to access administrative pages or a resource that you shouldn't be? Check in the forum rules that you are allowed to perform this action.";
$l['error_nopermission_user_4'] = "Your account may still be awaiting activation or moderation.";
$l['error_nopermission_user_5'] = "You have accessed this page directly rather than using appropriate forms or link.";
$l['error_nopermission_user_resendactivation'] = "Resend Activation Code";
$l['error_nopermission_user_username'] = "You are currently logged in with the username: '{1}'";
$l['logged_in_user'] = "Logged In User";
$l['error_too_many_images'] = "Too Many Images.";
$l['error_too_many_images2'] = "We are sorry, but we cannot process your post because it contains too many images. Please remove some images from your post to continue.";
$l['error_too_many_images3'] = "Note: The maximum amount of images per post is";
$l['error_attach_file'] = "Error Attaching File";
$l['please_correct_errors'] = "Please correct the following errors before continuing:";
$l['error_reachedattachquota'] = "Sorry, but you cannot attach this file because you have reached your attachment quota of {1}";
$l['error_maxattachpost'] = "Sorry but you cannot attach this file because you have reached the maximum number of attachments allowed per post of {1}";
$l['error_invaliduser'] = "The specified user is invalid or does not exist.";
$l['error_invalidaction'] = "Invalid action";
$l['error_messagelength'] = "Sorry, your message is too long and cannot be posted. Please try shortening your message and try again.";
$l['error_message_too_short'] = "Sorry, your message is too short and cannot be posted.";
$l['failed_login_wait'] = "You have failed to login within the required number of attempts. You must now wait {1}h {2}m {3}s before you can login again.";
$l['failed_login_again'] = " You have {1} more login attempts.";
$l['error_max_emails_day'] = "You cannot use the 'Send Thread to a Friend' or the 'Email User' features because you've already used up your allocated quota of sending {1} messages in the past 24 hours.";
$l['attachments_disabled'] = "You cannot use the attachment system as it has been disabled by the Administrator.";
$l['error_attach_filename_length'] = "The file name '{1}' exceeds the maximum file name length {2}. Please upload a file with a shorter file name.";
$l['emailsubject_lostpw'] = "Password Reset at {1}";
$l['emailsubject_passwordreset'] = "New password at {1}";
$l['emailsubject_subscription'] = "New Reply to {1}";
$l['emailsubject_randompassword'] = "Your Password for {1}";
$l['emailsubject_activateaccount'] = "Account Activation at {1}";
$l['emailsubject_forumsubscription'] = "New Thread in {1}";
$l['emailsubject_reportpost'] = "Reported post at {1}";
$l['emailsubject_reportprofile'] = "Reported user at {1}";
$l['emailsubject_reportreputation'] = "Reported reputation at {1}";
$l['emailsubject_reachedpmquota'] = "Private Messaging Quota Reached at {1}";
$l['emailsubject_changeemail'] = "Change of Email at {1}";
$l['emailsubject_newpm'] = "New Private Message at {1} - {2}";
$l['emailsubject_newjoinrequest'] = "New Join Request at {1}";
$l['emailsubject_sendtofriend'] = "Interesting discussion at {1}";
$l['emailsubject_changepassword'] = "Change of Password at {1}";
$l['emailbit_viewthread'] = "... (visit the thread to read more...)";
$l['email_lostpw'] = "{1},
To complete the phase of resetting your account password at {2}, you will need to go to the URL below in your web browser.
{3}/member.php?action=resetpassword&uid={4}&code={5}
If the above link does not work correctly, go to
{3}/member.php?action=resetpassword
You will need to enter the following:
Username: {1}
Activation Code: {5}
Thank you,
{2} Staff";
$l['email_lostpw1'] = "{1},
To complete the phase of resetting your account password at {2}, you will need to go to the URL below in your web browser.
{3}/member.php?action=resetpassword&uid={4}&code={5}
If the above link does not work correctly, go to
{3}/member.php?action=resetpassword
You will need to enter the following:
Your email address
Activation Code: {5}
Thank you,
{2} Staff";
$l['email_lostpw2'] = "{1},
To complete the phase of resetting your account password at {2}, you will need to go to the URL below in your web browser.
{3}/member.php?action=resetpassword&uid={4}&code={5}
If the above link does not work correctly, go to
{3}/member.php?action=resetpassword
You will need to enter the following:
Username: {1} (Or your email address)
Activation Code: {5}
Thank you,
{2} Staff";
$l['email_reportpost'] = "{1} from {2} has reported the following post:
{3}
{4}/{5}
The reason this user gave for reporting this post:
{6}
This message has been sent to all moderators of this forum, or all administrators and super moderators if there are no moderators.
Please check this post out as soon as possible.";
$l['email_reportprofile'] = "{1} from {2} has reported the following user:
{3}
{4}/{5}
The reason this user gave for reporting this user:
{6}
This message has been sent to all moderators of this forum, or all administrators and super moderators if there are no moderators.
Please check this user out as soon as possible.";
$l['email_reportreputation'] = "{1} from {2} has reported the following reputation:
{3}
{4}/{5}
The reason this user gave for reporting this reputation:
{6}
This message has been sent to all moderators of this forum, or all administrators and super moderators if there are no moderators.
Please check this reputation out as soon as possible.";
$l['email_report_comment_extra'] = "{1}: {2}";
$l['email_passwordreset'] = "{1},
Your password at {2} has been reset.
Your new password is: {3}
You will need this password to login to the forums, once you login you should change it by going to your User Control Panel.
Thank you,
{2} Staff";
$l['email_randompassword'] = "{1},
Thank you for registering on {2}. Below is your username and the randomly generated password. To login to {2}, you will need these details.
Username: {3}
Password: {4}
It is recommended you change your password immediately after you login. You can do this by going to your User CP then clicking Change Password on the left menu.
Thank you,
{2} Staff";
$l['email_randompassword1'] = "{1},
Thank you for registering on {2}. Below is your username and the randomly generated password. To login to {2}, you will need these details.
Your email address
Password: {4}
It is recommended you change your password immediately after you login. You can do this by going to your User CP then clicking Change Password on the left menu.
Thank you,
{2} Staff";
$l['email_randompassword2'] = "{1},
Thank you for registering on {2}. Below is your username and the randomly generated password. To login to {2}, you will need these details.
Username: {3} (Or your email address)
Password: {4}
It is recommended you change your password immediately after you login. You can do this by going to your User CP then clicking Change Password on the left menu.
Thank you,
{2} Staff";
$l['email_sendtofriend'] = "Hello,
{1} from {2} thought you may be interested in reading the following web page:
{3}
{1} included the following message:
------------------------------------------
{4}
------------------------------------------
Thank you,
{2} Staff
";
$l['email_forumsubscription'] = "{1},
{2} has just started a new thread in {3}. This is a forum you have subscribed to at {4}.
The thread is titled {5}
Here is an excerpt of the message:
--
{6}
--
To view the thread, you can go to the following URL:
{7}/{8}
There may also be other new threads and replies but you will not receive anymore notifications until you visit the board again.
Thank you,
{4} Staff
------------------------------------------
Unsubscription Information:
If you would not like to receive any more notifications of new threads in this forum, visit the following URL in your browser:
{7}/usercp.php?action=removesubscription&type=forum&fid={9}
------------------------------------------";
$l['email_activateaccount'] = "{1},
To complete the registration process on {2}, you will need to go to the URL below in your web browser.
{3}/member.php?action=activate&uid={4}&code={5}
If the above link does not work correctly, go to
{3}/member.php?action=activate
You will need to enter the following:
Username: {1}
Activation Code: {5}
Thank you,
{2} Staff";
$l['email_activateaccount1'] = "{1},
To complete the registration process on {2}, you will need to go to the URL below in your web browser.
{3}/member.php?action=activate&uid={4}&code={5}
If the above link does not work correctly, go to
{3}/member.php?action=activate
You will need to enter the following:
Your email address
Activation Code: {5}
Thank you,
{2} Staff";
$l['email_activateaccount2'] = "{1},
To complete the registration process on {2}, you will need to go to the URL below in your web browser.
{3}/member.php?action=activate&uid={4}&code={5}
If the above link does not work correctly, go to
{3}/member.php?action=activate
You will need to enter the following:
Username: {1} (Or your email address)
Activation Code: {5}
Thank you,
{2} Staff";
$l['email_subscription'] = "{1},
{2} has just replied to a thread which you have subscribed to at {3}. This thread is titled {4}.
Here is an excerpt of the message:
------------------------------------------
{5}
------------------------------------------
To view the thread, you can go to the following URL:
{6}/{7}
There may also be other replies to this thread but you will not receive anymore notifications until you visit the board again.
Thank you,
{3} Staff
------------------------------------------
Unsubscription Information:
If you would not like to receive any more notifications of replies to this thread, visit the following URL in your browser:
{6}/usercp.php?action=removesubscription&tid={8}
------------------------------------------";
$l['email_reachedpmquota'] = "{1},
This is an automated email from {2} to let you know that your Private Messaging inbox has reached its capacity.
One or more users may have tried to send you private messages and were unsuccessful in doing so because of this.
Please delete some of your private messages you currently have stored, remembering to also delete them from the 'Trash Can'.
Thank you,
{2} Staff
{3}";
$l['email_changeemail'] = "{1},
We have received a request on {2} to change your email address (see details below).
Old Email Address: {3}
New Email Address: {4}
If these changes are correct, please complete the validation process on {2} by going to the following URL in your web browser.
{5}/member.php?action=activate&uid={8}&code={6}
If the above link does not work correctly, go to
{5}/member.php?action=activate
You will need to enter the following:
Username: {7}
Activation Code: {6}
If you choose not to validate your new email address your profile will not be updated and will still contain your existing email address.
Thank you,
{2} Staff
{5}";
$l['email_changeemail_noactivation'] = "{1},
We have received a request on {2} to change your email address (see details below).
Old Email Address: {3}
New Email Address: {4}
This change has been automatically processed. If you did not request this change, please get in touch with an Administrator.
Thank you,
{2} Staff
{5}";
$l['email_changepassword'] = "{1},
You are receiving this email because you, or someone with access to your password, recently changed your account password.
Username: {1}
Email address: {2}
If you did not request this change, please get in touch with an Administrator.
Thank you,
{3} Staff
{4}";
$l['email_newpm'] = "{1},
You have received a new private message on {3} from {2}:
------------------------------------------
{5}
------------------------------------------
To view, reply or forward this message, you can follow this link:
{4}/private.php
Please note that you will not receive any further notifications of new messages until you visit {3}.
You can disable new message notifications on your account options page:
{4}/usercp.php?action=options
Thank you,
{3} Staff
{4}";
$l['email_emailuser'] = "{1},
{2} from {3} has sent you the following message:
------------------------------------------
{5}
------------------------------------------
Thank you,
{3} Staff
{4}
------------------------------------------
Don't want to receive email messages from other members?
If you don't want other members to be able to email you please visit your User Control Panel and enable the option 'Hide your email from other members':
{4}/usercp.php?action=options
------------------------------------------";
$l['email_groupleader_joinrequest'] = "{1},
{2} has requested to join {3} on {4} (see below).
Reason: {5}
To accept or decline this request, go to
{6}/managegroup.php?gid={7}
Thank you,
{4} Staff";
$l['email_contact_subject'] = "Contact: {1}";
$l['email_contact'] = "E-mail: {1}
Forum profile: {2}
IP Address: {3}
Message:
{4}";
$l['pmsubject_subscription'] = "New Reply to {1}";
$l['pm_subscription'] = "{1},
{2} has just replied to a thread which you have subscribed to. This thread is titled {3}.
Here is an excerpt of the message:
------------------------------------------
{4}
------------------------------------------
To view the thread, you can go to the following URL:
[url]{5}/{6}[/url]
There may also be other replies to this thread but you will not receive anymore notifications until you visit the thread again.
------------------------------------------
Unsubscription Information:
If you would not like to receive any more notifications of replies to this thread, visit the following URL in your browser:
[url]{5}/usercp.php?action=removesubscription&tid={7}[/url]
------------------------------------------";
$l['email_broken_task_subject'] = "MyBB task error on {1}";
$l['email_broken_task'] = "Your copy of MyBB running on {1} ({2}) has experienced an error with the task system.
The task file for {3} is missing.
This task has been disabled until issue is resolved.";
Overloud BREVERB 2 v2.1.17
The following warnings occurred:
Warning [2] Cannot modify header information - headers already sent by (output started at /home/softwar4/public_html/inc/languages/english/messages.lang.php:1) - Line: 2336 - File: inc/functions.php PHP 7.4.33 (Linux)
BREVERB 2 Emulates the analog output section of the hardware unit, making BREVERB 2 truer to the sound of the originals. With BREVERB 2 you have the sound of more than 50 new ambient spaces at your fingertips.
All ambience settings have been carefully crafted by Overloud engineers who referenced the preferred room and ambience choices of top sound designers. They cover a wide range of applications from mixing to post-production, and many of them are optimized for a particular instrument, from drums to vocals to guitars etc. Don't waste time flipping through dozens of different reverb plug-ins, looking for the right room sound. With BREVERB 2 you can find it in one click, with no compromises in sound quality.
Lexi algorithms
Designed to recreate the tone of the most famous units of the '80s and '90s, like the Lexicon 224* and the Lexicon 480*, you have the full control of every parameter available on the original unit. BREVERB 2 also reproduces the response of the A/D and D/A sections of the original units, which are an essential part of their tone. In addition, the EQ and the GATE sections extend the sound capabilities, going beyond what was possible with the original processors.
Two SPACES algorithms
SPACES algorithms are designed to meet the extremely high demands of audio professionals like you; today, as well as tomorrow. Created to complete the BREVERB palette, the SPACES algorithms are tailored to the mixing needs of any modern recordings. You are free to control up to 38 parameters to create your own unique room sound. Or, if you are on a tight deadline, you can use our comprehensive library of presets, designed by top-notch sound engineers.
SOURCE algorithm
BREVERB 2 features a new SOURCE reverb algorithm. With a simple click on the graphic interface you can set the 3D position of your sound sources and create life-like panoramas in your mix. The SOURCE algorithm is the ideal tool for post-production. You can separately design the early reflections and reverberant field, with full control over any parameter. Through automation you can have real-time control of the position of the sound source and create apparent movement of the sound sources. Whats new in this version
Official site does not provide any info about changes in this version. System Requirements
Windows 8 or newer
OSX 10.9 or higher