Register Account


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
PassMark MemTest86 Pro 10.0 Build 1000 Multilingual
#1
PassMark MemTest86 Pro 10.0 Build 1000 Multilingual

[Image: AMN5lgd.png]

MemTest86 is the original, free, stand alone memory testing software for x86 and ARM computers. MemTest86 boots from a USB flash drive and tests the RAM in your computer for faults using a series of comprehensive algorithms and test patterns.

The standard for memory diagnostics
- Boots from a USB flash drive to test the RAM in your computer for faults.
- Utilizing algorithms that have been in development for over 20 years.

Unreliable RAM can cause a multitude of problems. Corrupted data, crashes and unexplained behaviour.
Bad RAM is one of the most frustrating computer problems to have as symptoms are often random and hard to pin down. MemTest86 can help diagnose faulty RAM (or rule it out as a cause of system instability). As such it is often used by system builders, PC repair stores, overlockers & PC manufacturers.

PassMark MemTest86 supports all current technologies
- 13 different RAM testing algorithms - including row hammer fault detection*
- All RAM types supported (DDR2, DDR3, DDR4, SODIMM, XMP, ECC)
- Self-booting off USB or Network (PXE)* boot, without needing DOS, Linux nor Windows
- Optimized for UEFI-based x86/ARM systems
- Native 64-bit code (since version 5)
- ECC error detection & injection*
- Secure Boot verified ? Code signed by Microsoft
- Graphical interface with mouse input
- Save logs and create customizable HTML reports
- Full test automation via configuration file
- Support for memory blacklisting in Windows (badmemorylist) and Linux (BADRAM)
- Multi-language support (Chinese, German, Russian, Spanish & more)

Quote:Whats New in PassMark MemTest86 Pro Version 10.0 (Build 1000) 30/Sep/2022 :

New Features
       Added new experimental memory test as Test 14 [DMA test]. This test exercises the disk controller's DMA hardware to perform memory access, bypassing the CPU. The motivation for this test came from discovering a defective RAM module that did not produce errors when accessed via the CPU, but failed when files were read from disk via DMA. As this test is experimental, it shall be disabled by default.
       DIMM (Pro edition)/chip-level (Site Edition) error detection on limited number of hardware platforms. This includes mid-test error reporting, graphical UI summary report on test completion and per-DIMM/chip error count table in the HTML report.
           Added new config file parameter, 'CPUMAP', to specify the DRAM chip labeling map. By default, DRAM chips are labeled consecutively starting from U0 (eg. U0, U1,?, U15)
   Fixes/Enhancements
       Log file name now includes the timestamp
       Added new blacklist flag 'DISABLE_CPUINFO' for disabling CPU info collection
       Fixed 'MAXCPUS' config file parameter not being applied
       Fixed hammer test incorrectly running in single-sided mode in Free version
       Fixed clock speed measurement failure for ARM chipsets due to cycle count register not being enabled
       Fixed detection of MAC address used as unique ID for PXE boot
       Added support for reporting IBECC errors
       Fixed bug in reading ECC error count registers for various Intel/AMD Ryzen chipsets
       Fixed reading ECC error status register for Intel Tiger Lake-H and Alder Lake chipsets
       Fixed ECC detection on Intel Ice Lake-SP chipsets
       Added ECC detection support for multi-socket Intel Ice Lake-SP chipsets
       Fixed ECC support for Intel Rocket Lake chipset variant
       Added ECC support for AMD Ryzen Zen 3 50h-5fh chipset
       Fixed ECC support for AMD Ryzen Zen 2 chipsets with 2 memory channels
       Fixed ECC error false positives on Intel Atom C2000 chipsets
       Added support for retrieving Intel Ice Lake-SP CPU info
       Added support for retrieving Intel Ice Lake-SP RAM SPD data
       Added support for retrieving Intel Ice Lake-SP RAM temperature data
       Added SMBus (SPD) support for Intel Alder Lake-P
       Enable SMBus on Intel 801-based chipsets if disabled
       Fixed detection of SPD modules on systems with > 8 SMBus controllers (eg. quad socket systems)
       Fixed bug in mapping SPD module index to SMBIOS slot index
       Fixed detection of SPD slot for systems with soldered and removable DIMMs
       Fixed incorrect calculation of DDR5 transfer bandwidth
       Fixed DDR5 memory type in SMBIOS not being correctly parsed
       Fixed identification of data partition in USB flash drive
       Create 'Benchmark' directory to store RAM benchmark results if it does not already exist
       Updated blacklist

Home Page :

[To see links please register or login]


Download PassMark MemTest86 Pro 10.0 Build 1000 Multilingual + Cracked | 11.11 MB

[To see links please register or login]

[Image: signature.png]
Reply


Download Now



Forum Jump:


Users browsing this thread:
1 Guest(s)

Download Now