Professional And Prep. Course For 2D & 3D Autocad Certified

Professional And Prep. Course For 2D & 3D Autocad Certified - Printable Version

+- Softwarez.Info - Software's World! (https://softwarez.info)
+-- Forum: Library Zone (https://softwarez.info/Forum-Library-Zone)
+--- Forum: Video Tutorials (https://softwarez.info/Forum-Video-Tutorials)
+--- Thread: Professional And Prep. Course For 2D & 3D Autocad Certified (/Thread-Professional-And-Prep-Course-For-2D-3D-Autocad-Certified)

Professional And Prep. Course For 2D & 3D Autocad Certified - SKIKDA - 08-31-2023

[Image: vnpc.jpg]

Published 8/2023
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 8.97 GB | Duration: 13h 3m

2d & 3D AutoCAD detailed Course for All Levels and for architects, designers, engineers, and amateurs.

What you'll learn
 Participants will learn how to use draw tools, modify tools, view tools, and many tools related to two dimensions and three dimensions.
 This course offers the skills needed to start working effectively in AutoCAD 2020 or even up to date versions.
 Through using AutoCAD, students will be able to design and draw their projects required during their study or working.
 After completing this course and practicing too much, participants will be able to take AutoCAD 2020 certified associate and professional.
 This course contains practical exercises and homework. All these exercises will not be required to complete the course, but it is better for you to practice a
 This course will be managed and arranged by me to achieve better and effective way for all participants to understand the tools of the AutoCAD. For instance,
 The lectures are supported by many downloadable dwg and jpg files.

Requirements
This course is aimed at those with absolutely no prior experience in AutoCAD. It is also helpful to those who may have learned the software in the past but forgotten how to use it.

Description
AutoCAD basically is a vital program produced and marketed by Autodesk Inc. (CAD) is shortcut of computer aided design or drafting. This program is used for making 2-D and 3-D projects.Course objectives:1. Participants will learn how to use draw tools, modify tools, view tools, and many tools related to two dimensions and three dimensions.2. This course offers the skills needed to start working effectively in AutoCAD 2020.3. Through using AutoCAD, students will be able to design and draw their projects required during their study or working.4. After completing this course and practicing too much, participants will be able to take AutoCAD 2020 certified associate.5. This course contains practical exercises and homework. All these exercises will not be required to complete the course, but it is better for you to practice and follow the steps of explanation to avoid misunderstanding.6. This course will be managed and arranged by me to achieve better and effective way for all participants to understand the tools of the AutoCAD. For instance, you may see some modify tools before completing draw menu.7. The lectures are supported by many downloadable dwg and jpg files.8. After finishing this course, the user will be able to use AutoCAD commands to make a drawing, dimension a drawing, apply constraints to sketches, insert symbols as well as create text, blocks and dynamic blocks, and create 3d objects.9. In this course, special emphasis has been laid on industrial applications and usage of AutoCAD tools so that it serves beginners as well as professionals to understand the functions of the tools and their applications in the drawing.10. A comprehensive course consisting of + 90 video lectures for approximately 16 hours that are organized in a pedagogical sequence.RequirementsNo CAD Experience Required.Basic Computer Knowledge.Throughout the course I am available should you get stuck to answer any questions you may have.I look forward to introducing you to this software and getting you up and running quickly.

Overview
Section 1: Introduction

Lecture 1 Welcome to the AutoCAD Course

Section 2: Introduction to the Course

Lecture 2 AutoCAD Interface - Part 1

Lecture 3 AutoCAD Interface - part 2

Lecture 4 Creating a new file

Lecture 5 Save and Saveas files

Lecture 6 Opening files

Lecture 7 Changing drawing units

Lecture 8 Undo & Redo tools

Section 3: Drawing Commands - Part 1

Lecture 9 Ray and Construction Lines

Lecture 10 Draw a line with different ways

Lecture 11 Draw a point with using measure and divide tools

Section 4: Zoom, and Pan

Lecture 12 Zoom and Pan tools

Section 5: Modifying Commands - Part 1

Lecture 13 Erase command

Lecture 14 Copy command

Lecture 15 Move command

Lecture 16 Rotate command

Lecture 17 Offset command -Part 1

Lecture 18 Offset command - Part 2

Lecture 19 Trim command

Lecture 20 Extend command

Lecture 21 Fillet command

Lecture 22 Chamfer command

Section 6: Drawing Commands - Part 2

Lecture 23 Drawing a rectangle - Part 1

Lecture 24 Drawing a rectangle - Part 2

Lecture 25 Drawing a circle

Lecture 26 Drawing an Arc

Lecture 27 Drawing an ellipse - Part 1

Lecture 28 Drawing an ellipse - Part 2

Lecture 29 Drawing an ellipse - Part 3

Lecture 30 Drawing a polyline

Lecture 31 Drawing a revision cloud

Lecture 32 Drawing a Spline - Part 1

Lecture 33 Drawing a Spline - Part 2

Section 7: Modifying Commands - Part 2

Lecture 34 Mirror command

Lecture 35 Scale

Lecture 36 Stretch command

Lecture 37 Break at Point command - part 1

Lecture 38 Break at Point command - part 2

Lecture 39 Blend Curves command

Lecture 40 Explode command

Lecture 41 Align command

Lecture 42 Array command

Lecture 43 Lengthen command

Lecture 44 Example for offset

Lecture 45 Example for polygon, copy, mirror, and trim

Section 8: Creating and Managing Layers - All the story

Lecture 46 Layers - part 1

Lecture 47 Layers - part 2

Section 9: Working with blocks and attributes

Lecture 48 Make and Insert Block- part 1

Lecture 49 Make and Insert Block- part 2

Lecture 50 Attributes

Lecture 51 Download blocks file

Lecture 52 Furniture Blocks

Section 10: Working with Images and Overlapped Objects

Lecture 53 Raster image and draw order - part 1

Lecture 54 Raster Image - part 2

Section 11: Working with Annotation Tools

Lecture 55 Create texts and make your own text style

Lecture 56 Dimensions and Dimensions style

Lecture 57 Drawing table and making table style

Lecture 58 Using multiline and making styles

Lecture 59 Using multileader and making styles

Lecture 60 Dealing with hatches and gradient

Lecture 61 How to draw a geometrical shape?

Section 12: Downloadable floor plans for practicing

Lecture 62 Exercises for practicing

Section 13: Working with Layouts

Lecture 63 Layout in General

Lecture 64 Modifying and Controlling layouts

Lecture 65 Layout Viewports

Lecture 66 Layout Template

Lecture 67 Creating your own Frame for layout

Section 14: Introduction to 3D Modeling

Lecture 68 Draw a box for chnaging 3D views

Lecture 69 Working with ViewCube

Lecture 70 Working with 3D views

Lecture 71 Working with viewports

Lecture 72 User Coordinate System (UCS)

Section 15: 3D Modeling

Lecture 73 Drawing a box

Lecture 74 Drawing a wedge

Lecture 75 Drawing a cone

Lecture 76 Drawing a sphere

Lecture 77 Drawing a cylinder

Lecture 78 Drawing a torus

Lecture 79 Drawing a pyramid

Lecture 80 Extrude command

Lecture 81 Revolve command

Lecture 82 Sweep command

Lecture 83 Loft command

Lecture 84 Polysolid command

Lecture 85 Presspull command

Section 16: Working with Boolean and Solid Editing Tools

Lecture 86 Extrude faces command

Lecture 87 Intersect

Lecture 88 Interfere

Lecture 89 Shell

Lecture 90 Slice

Lecture 91 Subtract

Lecture 92 Union

• Engineers (mechanical,civil, electrical, electronics, and others), draftsman, students, designers, and anyone who desire to learn CAD

Buy Premium Account From My Download Links & Get Fastest Speed.

[To see links please register or login]