+- Softwarez.Info - Software's World! (https://softwarez.info)
+-- Forum: Software Zone (https://softwarez.info/Forum-Software-Zone)
+--- Forum: Windows Applications (https://softwarez.info/Forum-Windows-Applications)
+--- Thread: Red Rock Sound PUNCH v1.0.5 (/Thread-Red-Rock-Sound-PUNCH-v1-0-5--455496)
Red Rock Sound PUNCH v1.0.5 - BaDshaH - 06-26-2024
![[Image: Aecs-J0of-Ua-Wd-Gnrboc3jh79r-RZ5-X3rn-J.jpg]](https://i.postimg.cc/QxtwnYYT/Aecs-J0of-Ua-Wd-Gnrboc3jh79r-RZ5-X3rn-J.jpg)
BUBBiX | 25 June 2024 | 132 MB
PUNCH Immersive Channel Strip
The PUNCH combines the efficient design and cohesive sound of analog channel strips, with the diverse sonic color and flexible sound-shaping possibilities available only in digital.
Save time and avoid tedious manual workarounds with PUNCH plug-in designed from the ground up for fast, efficient work on mid/side, stereo and the objects, the beds (fixed channels) of immersive mixing environments.
INPUT ROUTING PANEL
Units
This module allows you to select an channel strip from four available. The channel strips are arranged in series, this allows you to process channels with different channel strip settings.
For example: the first channel strip is only the mid channel, the second channel strip is only the side channel, the third channel strip is the left and right channel. For multi-channel modes: the first channel strip is only the left and right channels, the second channel strip is the center channel, the third channel strip is the LFE, etc.
You can rename Unit Buttons for ease of use. To rename the selected Unit button, right-click on the button.
In order to turn on the solo (listen) of the channel strip, double-click on the selected unit number. The channel strip in solo mode glows yellow, to exit solo mode, double-click again. For two-channel modes, only one channel strip can be solo mode. For multi-channel modes, one or more channel strip can be soloed.
To bypass channel strip processing, press the selected unit number one click + shift. In bypass mode, the button will glow red.
You can also copy all channel strip settings to another unit. To do this, select the channel strip from which you want to copy the settings, then click on the copy button, then select the channel strip to which you want to copy the settings.
Input Routing
Input Routing lets you choose between 44 common channel setups, starting from Stereo up to 7.1.4 and 9.1.6. Simply select in the input routing module the channel setup that fits your track.
You can also create your own input routing profiles. 16 independent channels are available.
Click on the edit button next to the input routing selection display. Hold down the shift button and select the desired number of channels. Name selected channels in order. Then click save and name the profile.
Channels Selection
In this module, you can select (activate) the channels that the channel strip (unit) will process.
from nfo
(64-bit: VST2, VST3, AAX)
(32-bit: VST2, VST3)
Use installer and REPLACE with PATCHED.
Whats new in this version
Official site does not provide any info about changes in this version.
System Requirements
Windows 7 or higher (Windows XP not tested).
Homepage