Datacenter and MDF/IDF Tech 5+ hours course - Printable Version +- Softwarez.Info - Software's World! (https://softwarez.info) +-- Forum: Library Zone (https://softwarez.info/Forum-Library-Zone) +--- Forum: Video Tutorials (https://softwarez.info/Forum-Video-Tutorials) +--- Thread: Datacenter and MDF/IDF Tech 5+ hours course (/Thread-Datacenter-and-MDF-IDF-Tech-5-hours-course) |
Datacenter and MDF/IDF Tech 5+ hours course - BaDshaH - 10-30-2024 Last updated 4/2024 Created by Jeff Diamond MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch Genre: eLearning | Language: English + subtitle | Duration: 31 Lectures ( 5h 20m ) | Size: 3.66 GB Practical skills in server rooms, MDFs and IDFs, racking, etc. What you'll learn Real world tasks and skills performed by data center technicians Tours of REAL equipment rooms WAN and DHCP Server configuration Cyber security via IPSEC Ether-channel for vastly increasing data throughput HSRP redundancy Spanning Tree Protocol functions and administration Network validation, testing, and troubleshooting. Requirements Have Packet-Tracer or GNS3 installed on your device. Minimal pre-knowledge needed. At least know the basics of what a network is. Have a desire to learn datacenter networking Description What will I learn in this course?This is a massive course over 5 hours wherein you will learn some real-world tasks that data center technicians actually do, in hands-on labs AND learning as I take you into REAL equipment rooms with real running networks and racked devices. These skills also fulfill many of the Network+ exam goals, too. So, if you are planning to take either of those exams, you may find this course extremely valuable.What do I get with this course?Real-world networking skills and a FREE copy of my book On the Command Line with 100 commands and configurations (also on Amazon).What will I need to take this course?A desire to learn and a network simulation app such as Packet Tracer or GNS3, or any other simulated environment you prefer.What does this course contain?CCNA Data Center Technician is a hands-on course where you will learn many real-world common tasks performed by professional data center technicians. ALL subject matter herein also fulfills many of your 200-301 CCNA exam goals. Part 1We will begin by building and configuring our WAN, complete with real-world redundancy via HSRP. We will also learn about the importance of Spanning Tree Protocol and how to administer and monitor its status. These lectures contain information vital to fulfilling many of the 200-301 CCNA and Network+ exam goals.Part 2In part 2 of this course, we configure a DHCP server to operate over a WAN comprised of our SOHO network, cloud network, and a data center. Then we add in cybersecurity measures via Trusted Ports to protect our networks against a man-in-the-middle attack. We add in the ability for our client to log in remotely using SSH, along with other configurations that fulfill 200-301 CCNA and Network+ exam goals. You will also learn new show commands for monitoring and troubleshooting. Technology is for everyoneEveryone of any age and background can learn IT and gain a higher paying career, and I want you to be one of them. Thank you for visiting, and I hope to see you in class.Jeff DiamondCCNA / FOA CPCT, CFOT Who this course is for All levels of IT skill, from beginners on up to professionals. Beginners welcome because we go step-by-step. Homepage |