10.68 GB | 27min 14s | mp4 | 1920X1080 | 16:9
Genre:eLearning |Language:English

Files Included :
1 - Introduction To Course Setup.mp4 (1.23 MB)
53 - Subnetting a Class C Network Part1.mp4 (120.18 MB)
54 - Subnetting a Class C NetworkPart2.mp4 (120.93 MB)
55 - Reverse Engineering Subnetting For Class C.mp4 (26.06 MB)
56 - Subnetting a Class B Network Part1.mp4 (62.08 MB)
57 - Subnetting a Class B Network Part2.mp4 (79.42 MB)
58 - Reverse Engineering Subnetting For Class B.mp4 (16.39 MB)
59 - Subnetting a Class A Network Part1.mp4 (125.04 MB)
60 - Subnetting a Class A Network Part2.mp4 (110.99 MB)
61 - Reverse Engineering Subnetting For Class A.mp4 (6.1 MB)
62 - Switch Ports Without Port Security.mp4 (20.47 MB)
63 - Switch Ports Using Port Security Part1.mp4 (116.08 MB)
64 - Switch Ports Using Port Security Part2.mp4 (46.52 MB)
65 - Switch Ports Using Port Security Part3.mp4 (44.37 MB)
66 - Switch Ports Using Port Security Part4.mp4 (93.38 MB)
67 - Switch Ports MAC Address Table.mp4 (10.48 MB)
68 - Switches Without VLANS.mp4 (64.34 MB)
69 - Switches With VLANs Part1.mp4 (110.48 MB)
70 - Switches With VLANs Part2.mp4 (122.77 MB)
71 - Switches With VLANs Part3.mp4 (118.73 MB)
72 - Switches With VLANs Part4.mp4 (219.13 MB)
73 - Routing Between Different VLANS Using A Router Router On A Stick Part1.mp4 (50.33 MB)
74 - Routing Between Different VLANS Using A Router Router On A Stick Part2.mp4 (58.21 MB)
75 - Routing Between Different VLANS Using A Router Router On A Stick Part3.mp4 (63.06 MB)
76 - Routing Between Different VLANS Using A Multilayer Switch Part1.mp4 (174.28 MB)
77 - Routing Between Different VLANS Using A Multilayer Switch Part2.mp4 (42.05 MB)
78 - VTP Types ClientServerTransparent Part1.mp4 (101.08 MB)
79 - VTP Types ClientServerTransparent Part2.mp4 (68.11 MB)
80 - VTP Types ClientServerTransparent Part3.mp4 (175.19 MB)
81 - STP.mp4 (160.82 MB)
82 - RSTP.mp4 (63.47 MB)
83 - LACP.mp4 (178 MB)
84 - PAGP.mp4 (56.53 MB)
100 - Setting UP EIGRP Lab2.mp4 (64.79 MB)
101 - Setting UP EIGRP Lab3.mp4 (107.79 MB)
102 - Static Routing IPV6.mp4 (176.41 MB)
103 - Dynamic Routing RIPNG.mp4 (97.14 MB)
104 - Dynamic Routing OSPF.mp4 (46.08 MB)
105 - Dynamic Routing EIGRP.mp4 (21.73 MB)
85 - Working With One Router Default Routing.mp4 (129.29 MB)
86 - Two Routers Static Routing 2 Sites For Same Company.mp4 (212.71 MB)
87 - Three Routers Static Default 3 Sites For Same Company.mp4 (250.59 MB)
88 - Five Routers StaticFloating 5 Sites For Same Company Part1.mp4 (290.94 MB)
89 - Five Routers StaticFloating 5 Sites For Same Company Part2.mp4 (46.91 MB)
90 - Setting UP RIPV1.mp4 (222.19 MB)
91 - Setting UP RIPV2.mp4 (158.4 MB)
92 - Setting UP OSPF Lab1.mp4 (286.11 MB)
93 - Setting UP OSPF Lab2.mp4 (51.65 MB)
94 - Setting UP OSPF Lab3.mp4 (272.77 MB)
95 - Setting UP OSPF Lab4.mp4 (195.07 MB)
96 - Setting UP OSPF Lab5.mp4 (94.78 MB)
97 - Setting UP OSPF Lab6.mp4 (70.37 MB)
98 - Setting UP OSPF Lab7.mp4 (50.05 MB)
99 - Setting UP EIGRP Lab1.mp4 (200.21 MB)
106 - Setup DHCP On A Router For One Broadcast One Network.mp4 (25.74 MB)
107 - Setup DHCP On A Router For Two Broadcast Two Networks.mp4 (47.85 MB)
108 - Setup A DHCP Relay And What Its Purpose.mp4 (91.52 MB)
109 - Setup DHCP On One Server.mp4 (56.41 MB)
110 - Setup DHCP On Multiple Servers.mp4 (28.07 MB)
111 - What Is DHCP Snooping And How Does It Work.mp4 (56.24 MB)
112 - Setup DHCP For Multiple VLANs.mp4 (139.48 MB)
113 - Setting Up A Server As A DHCPv6 For One Network.mp4 (28.7 MB)
114 - Setting Up A Server As A DHCPv6 For Multiple Networks.mp4 (43.44 MB)
115 - Setting Up A Router As A DHCPv6 For One Network.mp4 (72.37 MB)
116 - Setting Up A Router As A DHCPv6 For Multiple Networks.mp4 (52.61 MB)
117 - A Typical Topology Without Fault Tolerance One Router.mp4 (67.04 MB)
118 - A Topology With Fault Tolerance Two Routers.mp4 (128.94 MB)
119 - A Topology With Fault Tolerance Two Routers Using HSRP Part1.mp4 (151.49 MB)
120 - A Topology With Fault Tolerance Two Routers Using HSRP Part2.mp4 (63.57 MB)
121 - Access List Types StandardExtendedNamed And The Rules.mp4 (38.95 MB)
122 - Standard Access List Part1.mp4 (68.52 MB)
123 - Standard Access List Part2.mp4 (184.11 MB)
124 - Standard Access List Part3.mp4 (142.41 MB)
125 - Standard Access List Part4.mp4 (29.52 MB)
126 - Extended Access List Part1.mp4 (109.37 MB)
127 - Extended Access List Part2.mp4 (84.29 MB)
128 - Extended Access List Part3.mp4 (127.65 MB)
129 - Extended Access List Part4.mp4 (12.73 MB)
130 - Named Access List.mp4 (58.72 MB)
2 - Download And Install Cisco Packet Tracer.mp4 (43.56 MB)
131 - What Is a Public And Private Network.mp4 (39.46 MB)
132 - Static NAT.mp4 (114.19 MB)
133 - Dynamic NAT.mp4 (84.63 MB)
134 - PAT.mp4 (42.27 MB)
135 - WIFI Part1.mp4 (172.5 MB)
136 - WIFI Part2.mp4 (29.74 MB)
137 - In A NutShell.mp4 (1.53 MB)
3 - How Do Hubs And Switches Operate.mp4 (76.17 MB)
4 - A Switch Or A Multilayer Switch.mp4 (59.62 MB)
5 - What Is The Purpose Of A Router And Switch.mp4 (30.11 MB)
6 - What Type Of Cables Are Out There.mp4 (102.88 MB)
7 - What Is The Difference Between A Broadcast And Collision Domain.mp4 (84.67 MB)
10 - Class C.mp4 (108.74 MB)
11 - Class B.mp4 (68.3 MB)
12 - Class A.mp4 (52.97 MB)
13 - Classes D And E.mp4 (4.69 MB)
14 - The Difference Between TCP And UDP Ports Part1.mp4 (65.26 MB)
15 - The Difference Between TCP And UDP Ports Part2.mp4 (115.77 MB)
8 - Overview Of All TCPIP Classes and How Binary and Decimal Work Part1.mp4 (26.64 MB)
9 - Overview Of All TCPIP Classes and How Binary and Decimal Work Part2.mp4 (26.08 MB)
16 - Routers Mode UserPrivilageGlobalConfigInterfaceSubinterface and Line.mp4 (57.19 MB)
17 - Change The Hostname and Change Date Time and The Time Zone.mp4 (22.82 MB)
18 - Change The History Size and Display The History.mp4 (15.2 MB)
19 - Difference Between The Enable Password and Enable Secret And How To Set Them Up.mp4 (29.77 MB)
20 - Storage Types Of The RouterRAMNVRAMFLASH.mp4 (60.34 MB)
21 - Interface Config IP AddressDescriptionDuplexSpeed.mp4 (88.07 MB)
22 - Setup A Time Server NTP.mp4 (53.73 MB)
23 - Disable IP Domain Lookup Name Server Domain Name.mp4 (29.56 MB)
24 - Configure The Console Line Direct Connection.mp4 (72.51 MB)
25 - Configure The VTY Line Remote Connection Telnet.mp4 (91.09 MB)
26 - Configure Usernames For Console and Telnet.mp4 (22.47 MB)
27 - How To Encrypt The Passwords.mp4 (7.47 MB)
28 - Configure The VTY Line Remote Connection SSH.mp4 (20.89 MB)
29 - Setup A Banner For The Router.mp4 (37.89 MB)
30 - Hostname Enable Secret Date Time History Size And Disable IP Domain Lookup.mp4 (32.71 MB)
31 - Interface Config DuplexSpeedDescriptionDisplay And Shut Down Ports.mp4 (153.19 MB)
32 - The MAC Address Table.mp4 (67.53 MB)
33 - Storage Types Of The SwitchRAMNVRAMFLASH.mp4 (49.07 MB)
34 - Configure The Console Line Direct Connection.mp4 (21.83 MB)
35 - Configure The VTY Line Remote Connection Telnet.mp4 (74.23 MB)
36 - Configure Usernames For Console and Telnet.mp4 (19.58 MB)
37 - Configure The VTY Line Remote Connection SSH.mp4 (33.68 MB)
38 - Setup A Banner For The Switch.mp4 (9.68 MB)
39 - TACACS Configuration.mp4 (73.86 MB)
40 - Backup The Router And The Switch Config and IOS To A TFTP Server.mp4 (151.8 MB)
41 - Restore The Router And The Switch Config From TFTP Server.mp4 (30.79 MB)
42 - Breaking Into The Router And The Switch.mp4 (89.93 MB)
43 - BinaryDecimalHexadecimal.mp4 (50.19 MB)
44 - IPV6 And How to Simplify And Follow The Rules.mp4 (32.16 MB)
45 - Global Unicast.mp4 (69.24 MB)
46 - Unique Site Local.mp4 (9.54 MB)
47 - Link Local.mp4 (99.92 MB)
48 - Multicast.mp4 (12.14 MB)
49 - AnyCast.mp4 (8.17 MB)
50 - LoopBack.mp4 (6.29 MB)
51 - Working With Static IPV6 Part1.mp4 (76.25 MB)
52 - Working With Static IPV6 Part2.mp4 (22.64 MB)]
Screenshot

AusFile
RapidGator